You cannot place an order from your country. United States

Pro-Design X-FIRE PPG siklóernyő

Új

Featured by OPTIFLEX® technology

Bővebb leírás

Megrendelhető

KÉRDÉS, ÁRAJÁNLAT KÉRÉS

  • 60
  • 75

Információ

The new X-FIRE Powerglider is a safe, stable and fun-to-fly glider with agile and quick handling pleasing the pilot from the first flight! The easy ground handling and optimum launch behavior with quickest inflation and coming overhead, as well as the forgiving general flight characteristic making it suitable for a wide range of pilots. For the every day and experienced pilots same as for low airtime and newcomer pilots. Thanks to the OPTIFLEX® technology the pilot can comfortably accelerate the glider to gain higher speed for longer straight cruise and XC flights by setting the profile accordingly.
The additional speed system allowing to reach top speed in non turbulent conditions and can be safely used when trimmers are in neutral position. This is an important safety feature, if there is a departure from accelerated flight, the recovery characteristics will be better with the trims in the slow, neutral position.
The tip steering feature gives a great option for small and flat turns during cruise and accelerated flight without slowing the wing down what happens when using the regular steering brake.

X-FIRE – the pleasing all-rounder with a cool design for the powered flight!

 

OPTIFLEX® is a Flare <=> Reflex adjustment system allowing the pilot to alter the profile shape in an optimum way for best lift at take off, for best flare and low speed during approach and landing, and for setting the profile to "speed" during cruise flight.

 

Features

  • easy zero wind inflation
  • short take off distance
  • effective flare for soft landings
  • ease of use
  • high efficiency performance
  • high cruise speed
  • high top speed
  • stability in turbulence
  • pleasing precise handling
  • suitable for most power units
  • trim riser
  • speed system
  • tip steering
  • unique cool canopy design
  • OPTIFLEX®

SST technology
PRO-DESIGN SST technology, a profile nose part reinforcement for better and unchanged launch behavior during the glider‘s whole life span!

  

New fabric
New glider fabric with special formular coating for highest durability, longer life span and highly improved porosity figures! Now with even lesser weight for an overall lighter glider!

  

Light fabric
New glider fabric now with even lesser weight for an overall lighter glider!

  

Partial V-rib technology 
PRO-DESIGN‘s new development with partial V-rib technology grants an optimum weight distribution to the top surface with fewer line attachment points on the lower surface.

  

Ram-Air pockets 
Ram-Air pockets at the inside of the leading edge on the lower sail reduce disturbing vibrations and stabilise the glider at high speed.

  

Reinforcement tape
A special tape running span-wise near the trailing edge reduces oscillation and allows for above average in-flight stability.

  

TETS-brake-line-attachments 
For more efficiency on the brake-effect and optimising the tension on the trailing edge with minimum brakelines necessary

  

Differing line diameters 
The special PRO-DESIGN line concept with progressively differing diameters allows for maximum overall strength and the lowest possible drag. Another important new development from PRO-DESIGN is the new pre-stretched and bend-insensitive Dyneema line. These highly durable lines have an increased breaking strength while remaining consistent in length.

  

Splitline 
A special A-folding line for easily doing big-ears is also standard.

  

Velco opening on stabilizer
On the back part of the stabilizer there is an integrated Velcro opening what allows to remove dirt from the inside of the canopy.

  

Convex panel cut
A special convex cut of the panel in the nose section cares for improved accuracy of the profile shape resulting in a better performance feature.

  

Swivel on brake handle
The in the brake handle integrated swivel prevents the main brake line to get twisted.

X-FIRESM
area projected19,74 m²21,32 m²
area flat22,24 m²24,01 m²
span projected8,87 m9,21 m
span flat10,69 m11,11 m
aspect ratio projected4,34,3
aspect ratio flat5,55,5
no. of cells5353
weight4,8 kg5,0 kg
min./max. total load (PG weight range)60-80kg75-95 kg
min./max. total load (PPG weight range)60-120kg75-140 kg
Predicted EN ratingBB
DGAC**
load tested
*pending